Transferring Methods Between Lc Systems - Agilent Technologies G1323B User Manual

2 Working with the Control Module
Working with Methods
If you want to store the current method on PC card, you have to use the Save
As function (see
modules first. From there you can copy it to PC card as described in this
section.

Transferring Methods Between LC Systems

Methods can be transferred from one LC system to another using a PC card.
1 Save the method you want to transfer onto a PC card. See section
2 Remove the PC card from the control module.
3 Insert the PC card into the control module of the other LC system.
If this system does not have a control module connected, use any available control module.
N O T E
4 Restart the control module using the Restart function via the m (menu) key
5 Load the method from the PC card. See section
46
"Saving a Method"
"Exchanging Methods With the PC Card"
(available from the main screens).
the PC Card" on page 45.
on page 44) in order to store it in the
on page 45.
"Exchanging Methods With
1200 Series Handheld Control Module Users's Guide