Time Programming - Agilent Technologies G1323B User Manual

Time Programming

To time-program selected settings during the analysis you can create a
timetable. Using the Timetable screen, you can create a time based program
that will automatically control the pump, detector, column compartment and
external contacts.
In some cases the settings will change instantaneously from the initial value to
the value specified after a certain time in the timetable (e.g. wavelength). In
other cases (solvent composition) these changes take place dynamically,
approaching the set value in a step wise and linear manner.
The timetable becomes part of the current method when the method is saved.
N O T E
The timetable is accessed by selecting the Timetable button [F2] in the Analysis
screen.
A timetable line can be inserted by pressing the Insert button [F7] and consists
of the following:
• Time
• Module
• Setting
• Value
You can edit an existing timetable line by pressing the Enter key. Use the
Delete button [F6] and make a choice from the pop-up menu to delete either
the selected line or the whole timetable.
You can copy and paste timetable lines by selecting the respective choices
available from the context menu (m key).
1200 Series Handheld Control Module Users's Guide
Set the time span between the instant of injection and the desired
parameter change.
Choose the module that controls the parameter you want to change.
Select the parameter to be changed.
Enter the desired parameter value.
Working with the Control Module

Time Programming

2
47