Agilent Technologies G1323B User Manual page 143

9 Enter the following information:
10 Select the Done button [F6] to accept entries.
11 Select the Start button [F8] in the Sequence screen.
12 Press Enter to start the sequence.
The autosampler now analyzes:
• three type A calibration standards in duplicate,
• type A samples in vials 7 and 8,
• three type A calibration standards in duplicate,
• type A samples in vials 9 and 10,
• three type A calibration standards in duplicate,
• type A samples in vials 11 to 12,
• three type A calibration standards in duplicate,
• three type B calibration standards in duplicate,
• type B samples in vials 13, 14 and 15,
• three type B calibration standards in duplicate,
• type B samples in vials 16,17 and 18,
• three type B calibration standards in duplicate,
• type B samples in vials 19, 20 and 21, and
• three type B calibration standards in duplicate.
1200 Series Handheld Control Module Users's Guide
Calibration vial range 4 to 6
Number of injections 2
Inj. Volume Default
Calibration method METH3
Recalibrate every 3 vials multi
Before On
After Off
Running Multiple-Vial Analyses
Multiple-Level Calibration Sequences
11
143