Observing the Chromatogram
1 Select the Plot button [F6] in the Analysis screen.
2 Press the
3 Choose a Signal from the Available Signals list box.
4 Press Enter.
You can choose several signals at a time. The plot function will display all signals that are
N O T E
shown in the Selected Signals list box. Use the selection keys to navigate within the list
boxes and press the Enter key to move Signals from one box to the other.
5 Select the Done button [F6] to display the chromatogram.
6 Press Esc to go back to the Analysis screen.
7 Press the Start button [F8].
8 Select OK to confirm the vial range and injection number and press Enter
1200 Series Handheld Control Module Users's Guide
Select
button [F6].
to start the analysis.
Running a Gradient Analysis
Observing the Chromatogram
10
129