Setting Up The Thermostatted Autosampler - Agilent Technologies G1323B User Manual

Using the Autosampler 5
Entering Settings

Setting up the Thermostatted Autosampler

If a thermostatted autosampler is part of your system you can enter specific
setting using the Thermostat option in the settings screen.
Using this option you can set the temperature of the airflow into the
autosampler. This setting is available in the Analysis screen, too. Activate the
check box to have the temperature controlled as soon as the cooled
autosampler is turned on.
Using the More ... option in the Settings screen and selecting Signals you can
choose among several thermostat parameters (ambient temperature, heat
sink, heat sink fan etc.) that will be referred to as "Autosampler: Auxiliary" in
the Plot - Signals screen. This allows you to access a variety of thermostatted
autosampler signals without overloading the Available Signals list box (see
"Plot Screen" on page 31).
1200 Series Handheld Control Module Users's Guide 79