Table of Contents
Advertisement
General Functions
Turning On/Off LC System and Modules
Use the On/Off button [F7] in the Analysis screen to turn on or off either the
complete system or each module individually.
Setting Date and Time
You can set the date and time using the context menu (m key) while the
System screen is active. Choose the Date & Time option and press Enter .
Press Setup button [F6] to change the settings. Press Done [F6] to confirm the
new entries. Alternatively, choose Configure and select LC System. Press Date&
Time [F4]. When date and time are changed in the control module, the settings
are automatically stored in all the connected modules. The date and time are
backed up by a battery in each module. The control module does not have a
clock of its own.
Upon startup the modules synchronize their internal clocks. The clocks can also be
N O T E
synchronized by an external chromatographic data system, like the Agilent ChemStation.
Setting Display Contrast
From the System screen choose Configure and select LC System. Press Display and
then use the Selection keys to enter values between 0 and 31 to adjust the
display contrast according to your personal and location requirements. Then
press Done.
1200 Series Handheld Control Module Users's Guide
Working with the Control Module
General Functions
2
37
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
