Safety Symbols - Agilent Technologies G1323B User Manual

Some adjustments described in the manual, are made with power supplied to
the instrument, and protective covers removed. Energy available at many
points may, if contacted, result in personal injury.
Any adjustment, maintenance, and repair of the opened instrument under
voltage should be avoided as much as possible. When inevitable, this should be
carried out by a skilled person who is aware of the hazard involved. Do not
attempt internal service or adjustment unless another person, capable of
rendering first aid and resuscitation, is present. Do not replace components
with power cable connected.
Do not operate the instrument in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes a
definite safety hazard.
Do not install substitute parts or make any unauthorized modification to the
instrument.
Capacitors inside the instrument may still be charged, even though the
instrument has been disconnected from its source of supply. Dangerous
voltages, capable of causing serious personal injury, are present in this
instrument. Use extreme caution when handling, testing and adjusting.

Safety Symbols

Table 8
Table 8
Symbol
1200 Series Handheld Control Module Users's Guide
shows safety symbols used on the instrument and in the manuals.
Safety Symbols
Description
The apparatus is marked with this symbol when the user should refer to the
!
instruction manual in order to protect the apparatus against damage.
Indicates dangerous voltages.
Indicates a protected ground terminal.
Eye damage may result from directly viewing the light produced by the Xenon flash
lamp used in this product. Always turn the xenon flash lamp off before removing it.
Appendix
Safety Information
159
A