Send Single Start Request - Agilent Technologies G1323B User Manual

Send Single Start Request

After you start the analysis with the control module it will generate a single
start request on the APG remote lines. This allows to trigger the external
device which will start each injection by sending a start signal. The vial range
or sequence will be started by the control module, but for every new injection
the external device must give the start command.
Figure 18 Send single external start request
In this mode the control module will simply track the progress of the vial
range or sequence. It will indicate the proper sample, change sequence lines,
load methods or other sequence related actions for each run.
1200 Series Handheld Control Module Users's Guide
Running Multiple-Vial Analyses
Synchronizing Analyses with External Devices
11
145