The Enter key
With Enter you accept a current entry or action. When entering a parameter
into a certain field, Enter leads you on to the next accessible entry field. In
this case it has the same function as the right Direction key.
Navigation keys
These 5 keys [F1 - F5] allow you to switch between the menus. Within these
menus the relevant parameters can be set and certain functions can be
accessed. The Navigation keys always correspond to a button displayed above
them on the screen. The menus accessed via the buttons vary according to the
screen you are working with. In some cases pressing a button will cause a list
box to appear. From there you must make a choice in order to proceed.
Action keys
The 3 Action keys [F6-F8] trigger a variety of functions. The available
functions depend on the screen you are working with.
Selection keys
With the Selection keys (arrow up/down) you can select settings in various
list boxes. You can also change values in certain parameter entry fields or
enter alphanumeric characters.
Direction keys
With the Direction keys (arrow left/right) you can move back and forth
between the entry fields.
1200 Series Handheld Control Module Users's Guide
The Agilent 1200 Series Control Module
Control Module Keys
1
21