5
Using the Autosampler
Configuring the Autosampler
Configuring the Autosampler
1 Select the Configure button [F2] in the System screen.
2 Select Autosampler from the menu.
3 Press Enter.
You can configure the syringe volume, seat capillary volume, action on missing
vial, trays, interfaces etc.
Configuring Interfaces
1 Select the Configure button [F2] in the System screen.
2 Select Autosampler from the menu.
3 Press Enter.
4 Select the Interfaces button [F1].
5 Select the interfaces you want to operate (see
6 Select the Done button [F6].
76
Devices"
on page 57).
"Connecting External
1200 Series Handheld Control Module Users's Guide