Setting In-Sensor Data Type - Nellcor OxiMax N-595 Operator's Manual

OXIMAX Sensor Event Record

Setting In-Sensor Data Type

66
Event records can only be viewed after an O
patient data (event records) has been connected to an O
monitor. Event records are designed to view patient events from prior
areas of care or transport (history) while monitor trend should be used
to view data or events from a patient currently being monitored. The
monitor's SENSOR EVENT RECORD indicator will light when an
O M sensor containing event data is connected to the O
XI AX
monitor.
Patient event data is accessed by pressing the TREND softkey on the
main menu and selecting the SENSOR softkey option. Sensor event
record can be viewed in graphical form (GRAPH) or in a summary
table (TABLE).
Note: Once the O M
XI
O M sensor and event data is stored in the O
XI AX
the O M sensor event record type cannot be reset. The
XI AX
monitor's type set up can be changed at any time.
Recording and viewing of O
available on O M comparable monitors. The O
XI AX
function on older technology monitors but the O
record feature is not available.
Refer to the N-595 service manual for the procedure to disable the
storage of sensor event record on an O
The In-Sensor Data Type display allows the user to set the type of
trend data to be recorded in an O
set to record either SpO
Note: The O M sensor data type can only be set when an O
XI AX
sensor is not connected to the monitor.
With the monitor turned on and no cable attached to the SpO
sensor port:
sensor event record type is set up in the
AX
M sensor event record is only
XI AX
M
XI AX
M sensor. O
XI AX
or SpO +BPM.
2 2
M sensor containing
XI AX
M
XI AX
M
XI AX
M sensor,
XI AX
M sensors may
XI AX
M sensor event
XI AX
sensor.
M sensors can be
XI AX
M
XI
O M
2 XI
AX
AX