Oxi Max Sensor Adjust Condition Messages - Nellcor OxiMax N-595 Operator's Manual

Using the Monitor
O M Sensor Adjust Condition Messages
XI AX
50
O M sensor message screen will not return until a new condition
XI AX
occurs.
If the HELP softkey is pressed from the Condition message display,
the action messages are displayed. Action messages are linked to the
sensor type; action messages will be displayed for the type of O
sensor connected to the monitor. Up to five action messages may be
displayed. Multiple screens may be required to display all of the
messages. When multiple screens are required, navigation between
screens can be accomplished through the NEXT, BACK, and EXIT
softkeys.
O M sensor messages may be disabled. Refer to OXIMAX Sensor
XI AX
Message Setup on page 127 for selecting the O
Messages, Enable/Disable function.
• Condition 1 — SENSOR OFF?
• Condition 2 — SMALL PULSES
• Condition 3 — WEAK SIGNAL
M
XI AX
M Sensor
XI AX