Electrical - Nellcor OxiMax N-595 Operator's Manual

Specifications

Electrical

148
Accuracy and Motion Tolerance
1 Adult specifications are shown for O
-
sensors with the N 595. Neonate specifications are shown for O
-
MAX N sensors with the N
sensor type. Refer to the Sensor Accuracy Grid. The Sensor Accuracy
Grid is shipped with the monitor. The latest version of the Sensor
Accuracy Grid is available on the Internet at:
http://www.mallinckrodt.com/respiratory/resp/Serv_Supp/
ProductManuals.html
2
Applicability: O M
XI AX
-
MAX N sensors.
3
Specification applies to monitor performance.
Display Update Interval
2 seconds
Power rated at 108 to 132 volts AC (nominal 120 VAC) or
Requirements 220 to 240 volts AC (nominal 230 VAC), 20 volt/
amps to be compliant with IEC 60601
10.2.2
Fuses
qty 2, 0.5 A, 250 volts, slow
IEC (5 x 20 mm)
The battery provides at least 2 hours of battery life when new and fully
charged with no alarms, no serial data, no analog output, no nurse call
output, with backlight on while using a pulse simulator set for 224 bpm,
high light and low modulation.
M MAX
XI AX
-
595. Saturation accuracy will vary by
- -
MAX A, MAX AL, MAX
Instrument
Battery
- -
A and MAX N
M
XI AX
- -
P, MAX I, and
- -
1 sub clause
-
blow,