Nellcor OxiMax N-595 Operator's Manual page 23

Description of Controls, Indicators, and Symbols
motion indicator and the pulse search indicator are simultaneously lit,
it is an indication that the artifact is significant and/or has been
persistent.
The Pulse Search Indicator. Lights continuously prior to initial
acquisition of a pulse signal and during prolonged and challenging
monitoring conditions. The pulse search indicator flashes during a
loss-of-pulse signal.
The Data In-Sensor Indicator. Lights to indicate that the attached
O M sensor contains a patient sensor event record. The sensor
XI AX
event record information may be viewed or printed.
The SatSeconds Indicator. Fills in clockwise as the SatSeconds alarm
management system detects a %SpO reading outside of the limit
2
setting. Empties in counterclockwise direction when %SpO reading
2
is within limits. When the indicator is full, a medium priority alarm
will sound.
The Fast Response Mode Indicator. The response mode setting
dictates the response time (2 to 4 seconds in fast mode and 4 to 7
seconds in normal mode) applied by the O M algorithm in its
XI AX
calculation of SpO . The O M algorithm's calculation of pulse rate
2 XI AX
is unaffected by the response mode setting. The trending interval
(2-seconds or 4-seconds) is updated automatically by the monitor to
roughly correspond with the SpO calculation response time.
2
The Neonate Alarm Limits Indicator. This symbol is displayed when
the alarm limits are set to neonate. No symbol is displayed when the
monitor is set to adult limits.
1
Artifacts are events contained in the in-sensor data.
N-595 13