Maintenance
Periodic Safety Checks
Cleaning
130
It is recommended that the following checks be performed every 24
months.
•
Inspect the equipment for mechanical and functional
damage.
•
Inspect the safety relevant labels for legibility.
Caution: Do not spray, pour, or spill any liquid on the N-595, its
accessories, connectors, switches, or openings in the chassis.
For surface-cleaning and disinfecting the monitor, follow your
institution's procedures or:
•
The N-595 may be surface-cleaned by using a soft cloth
dampened with either a commercial, nonabrasive cleaner
or a solution of 70% alcohol in water, and lightly wiping
the surfaces of the monitor.
•
The N-595 may be disinfected using a soft cloth saturated
with a solution of 10% chlorine bleach in tap water.
Before attempting to clean an SpO
directions for use enclosed with the O
sensor model has cleaning instructions specific to that O
Follow the O
M
sensor cleaning and disinfecting procedures in the
XI
AX
particular O
M
sensor's directions for use.
XI
AX
O
M
sensor, read the
2
XI
AX
M
sensor. Each O
XI
AX
XI
M
XI
AX
M
sensor.
AX