Using the Monitor
Turning the Backlight On or Off
LIGHT
Adjusting Screen Contrast
Selecting the Pleth View
34
Note: When the backlight is off, any of the following conditions will
turn on the backlight:
•
pressing any of the softkeys
•
pressing the CONTRAST button
•
pressing the ALARM SILENCE button
•
any alarm
With the monitor in the normal monitoring mode, press the LIGHT
softkey.
With the monitor in the normal monitoring mode:
1. Press the CONTRAST button.
2. Press the ADJUST UP or ADJUST DOWN button until the
desired contrast is obtained.
3. Press the CONTRAST button.
The pleth view displays the pleth waveform, %SpO
data. Refer to Principles of Operation on page 143, for a description
of the pleth waveform.
, and pulse rate
2