Description of Controls, Indicators, and Symbols
Description of Displays and Indicators
10
The ALARM SILENCE button clears "SENSOR OFF," "LOW
BATTERY," and "SENSOR DISCONNECT" messages from the
display.
The ADJUST UP button. Used to increase variable parameters of the
monitor.
The ADJUST DOWN button. Used to decrease variable parameters
in the monitor.
The CONTRAST button. Used in conjunction with the ADJUST UP
and ADJUST DOWN buttons to lighten or darken the display screen.
The softkey buttons have multiple uses depending on the legend
displayed above the button.
The type of display is user selectable. Refer to Selecting the Pleth
View on page 34.
The pleth display includes a "wiper bar" plethysmographic
waveform, menu bar, and current measured %SpO
SatSeconds are enabled, the pleth display includes the SatSeconds
indicator and SatSeconds setting. A decimal point after the %SpO
and pulse rate. If
2
or
2