Setting SatSeconds Duration
Discussion
Procedure
Setting the Data Port Baud Rate
Discussion
N-560 Operator's Manual
Refer to Describing SatSeconds on page 87 for a description of the
SatSeconds function.
With the N-560 in the normal monitoring mode:
1. Press the
SatSeconds Alarm Limit
setting is displayed.
Note: The possible settings for SatSeconds are Off, 10, 25, 50, and
100 seconds.
2. Press the
Adjust Up
desired SatSeconds setting.
The baud rate determines the speed at which the N-560 sends data to the
attached equipment (printer or computer). The baud rate is determined by
the capabilities of the attached equipment.
button. The current SatSeconds
button or
Adjust Down
Using the N-560
button to select the
37