Nellcor OxiMax N-595 Operator's Manual page 82

OXIMAX Sensor Event Record
72
• The O M
XI
The graph title shows the data type (EVENT GRAPH) in the upper
left corner. The number of the displayed event and the total number of
events recorded in the O
title (example, 2/2). The date and time of the displayed event are
shown in the upper center and upper right corner.
The type of data displayed in the graph is indicated to the left of the
vertical axis (%SpO ). Below this is the range of values (min/max)
2
during the event. The duration of the event is shown below the range
value. The vertical axis of the graph is labeled to show the magnitude
scale of the graphed data. The horizontal axis is not labeled but
automatically scales to accommodate the number of 30-second
intervals during the event. The alarm threshold (lower than %SpO
alarm limit) is represented by a horizontal dotted line across the
graph. The first data point is always the alarm threshold.
Events are displayed one at a time, one per graph. Graphs are
displayed in chronological sequence with the most recent event
shown first when accessing the graphical O
display. The user can move between events by using the two left-most
softkeys which are labeled with left- and right-facing arrow icons,
respectively. At the beginning of an event sequence, event 1 of 2
events, the left-arrow soft key is blank; at the end of a sequence, event
2 of 2 events, the right-arrow soft key is blank.
The ADJUST UP and ADJUST DOWN buttons on the monitor panel
can also be used to move through events.
The PRINT softkey allows the user to print the displayed event graph.
The BACK softkey takes the user back to the previous TREND/
SENSOR sub-menu level.
sensor is off the patient
AX
M sensor are shown to the right of the
XI AX
XI
2
M sensor event
AX