Performance Verification
Setting the Time and Date
Discussion
Procedure
20
WARNING: The sensor uses the date and time provided by the NPB-40
handheld pulse oximeter when the sensor event record is recorded by the
sensor. The accuracy of the date/time is dependent on the date/time already
set in and provided by the NPB-40.
Note: Allowing the NPB-40 to time-out (30 seconds) sets the currently shown
parameter and the NPB-40 display returns to the normal operating display.
With the NPB-40 in the normal monitoring mode:
1. Press the Power button to turn the NPB-40 Off.
2. Press the Power button to turn the NPB-40 On.
3. Press the Menu button during the POST operation until the set hours window
is shown with the hours indication (13) flashing.
4. Press the Up Arrow button or the Down Arrow button until the desired
hours are shown.