Operating Status - Nellcor OxiMax N-595 Operator's Manual

Printing

Operating Status

88
example the %SpO is 100, and the pulse rate is 190 beats per minute.
2
The "*" next to the 190 indicates that 190 beats per minute is outside
of the alarm limits, indicated in the top row, for pulse rate. If no data
for a parameter is available, three dashes (- - -) will be displayed.
PA represents pulse amplitude. The number can range from 0 to 254.
There are no alarm parameters for this value. It can be used for
trending information as an indication of a change in pulse volume,
relative pulse strength, or circulation.
The Status column indicates alarm conditions and operating status of
the N-595. In this example, the PH means that the pulse rate upper
alarm limit (Pulse High) has been exceeded. A complete listing of the
status codes is listed below. As many as four codes can be displayed
at one time in the Status column.
Code
AO
AS
LB
LM
LP
MO
PH
PL
PS
Meaning
Alarm Off
Alarm Silence
Low Battery
Loss of Pulse w/ Motion
Loss of Pulse
Patient MOtion
Pulse Rate Upper Limit Alarm
Pulse Rate Lower Limit Alarm
Pulse Search