Nellcor OxiMax N-595 Operator's Manual page 77

SETUP
SENSOR
DATA
SELECT
N-595
1. Press the SETUP softkey.
2. Press the SENSOR softkey.
3. Press the DATA softkey.
Note: O M sensor data type settings are displayed on the monitor
XI AX
as shown in the figure below (in-sensor data type). If no sensor
is connected, both sensor types and the full set of options for
each are displayed. If a sensor is connected, only the sensor
data type for that sensor is displayed.
Note: The SENSOR-R feature supports all the current O
sensors. The SENSOR-RW feature is only applicable to
O M sensors with a read/write chip installed.
XI AX
4. Use the SELECT softkey to toggle between SENSOR-R and
SENSOR-RW.
OXIMAX Sensor Event Record
M
XI AX
67