Static Multicast Mac Addresses On Link Aggregate Ports - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Managing Source Learning

Static Multicast MAC Addresses on Link Aggregate Ports

Static multicast MAC addresses are not assigned to physical ports that belong to a link aggregate. Instead,
they are assigned to a link aggregate ID that represents a collection of physical ports. This ID is specified
at the time the link aggregate of ports is created and when using the mac-address-table static-multicast
command.
To configure a static multicast MAC address on a link aggregate ID, use the
mac-address command with the linkagg keyword to specify the link aggregate ID. For example, the
following command assigns a static multicast MAC address to link aggregate ID 2 associated with VLAN
455:
-> mac-learning vlan 455 linkagg 2 multicast mac-address 01:95:2A:00:3E:4c
OmniSwitch AOS Release 8 Network Configuration Guide
Using Static Multicast MAC Addresses
mac-learning multicast
December 2017 page 3-6