Enabling/Disabling Appmon - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Application Monitoring and Enforcement

Enabling/Disabling AppMon

To enable AppMon feature globally on the switch, use the
enable option. By default, AppMon is disabled on the switch.
-> app-mon admin-state enable
To disable AppMon functionality, use the
-> app-mon admin-state disable
Note. AppMon cannot be enabled globally when,
•
all the mirroring sessions are used by port mirroring or monitoring features.
•
mirroring session is used by policy manager.
Enabling/Disabling AppMon Per Port or Slot
To enable AppMon on one or more switch ports, use the
enable option as shown. It is mandatory to enable AppMon globally for the port level AppMon to
function.By default, AppMon is disabled on all the switch ports.
For example, the following command enables AppMon on ports 1/1/2 through 1/1/5:
-> app-mon port 1/1/2-5 admin-state enable
For example, the following command enables AppMon on slot 1.
-> app-mon slot 1/1 admin-state enable
When slot option is used, then AppMon configuration is applied on all physical ports of that particular
slot.
To disable AppMon functionality on a port or slot, use the
disable option. For example:
-> app-mon port 1/1/2-5 admin-state disable
-> app-mon slot 1/1 admin-state disable
OmniSwitch AOS Release 8 Network Configuration Guide
app-mon admin-state
app-mon admin-state command with the disable option.
app-mon port admin-state
app-mon port admin-state
December 2017
Configuring AppMon
command with the
command with
command with
page 29-13