Quick Steps For Configuring Mvrp - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring MVRP

Quick Steps for Configuring MVRP

The following steps provide a quick tutorial on how to configure MVRP. Each step describes a specific
operation and provides the CLI command syntax for performing that operation.
1
Create a VLAN using the
-> vlan 5 name "vlan-5"
2
Assign a port to the VLAN using the
-> vlan 5 members port 1/2
3
Tag the port with one or more VLANs using the
-> vlan 5 members port 1/2 tagged
4
Enable MVRP globally on the switch by using the
-> mvrp enable
5
Enable MVRP on the port by using the
enables MVRP on port 1/2 of the switch:
-> mvrp port 1/2 enable
6
Optional: Restrict a port from becoming a member of the statically created VLAN by using the
static-vlan-restrict command. For example, the following command restricts port 1/5 from becoming a
member of static VLAN 10:
-> mvrp port 1/5 static-vlan-restrict vlan 10
Note. To view the global configuration details of the router, enter the
The globally configured details are displayed as shown:
> show mvrp configuration
MVRP Enabled : yes,
Maximum VLAN Limit : 256
To view the MVRP configuration for a specific port, enter the
configuration data of the particular port is displayed as shown:
> show mvrp port 1/2
MVRP Enabled
Registrar Mode
Applicant Mode
Join Timer (msec)
Leave Timer (msec)
LeaveAll Timer (msec) : 30000,
Periodic Timer (sec)
Periodic Tx Status
See the OmniSwitch AOS Release 8 CLI Reference Guide for information about the fields in this display.
OmniSwitch AOS Release 8 Network Configuration Guide
vlan command. For example:
vlan members
vlan members
mvrp
mvrp port
: no,
: normal,
: participant,
: 600,
: 1800,
: 1,
: disabled
December 2017
Quick Steps for Configuring MVRP
command. For example:
command. For example:
command.
command. For example, the following command
show mvrp configuration
show mvrp port
mvrp
command.
command. The
page 12-3