Interaction With Other Features - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Ethernet Ports
Interface Violation Exceptions
An interface violation is not applied to an interface when any of the following scenarios occur:
•
An interface is already in a permanent shutdown state. In this case, the only method for recovery is to
use the interfaces split-mode
•
An interface is already shutdown by another feature.
•
An interface is not operationally up.

Interaction With Other Features

The table below lists the features that use the interfaces violation recovery mechanisms, along with the
violation reason and shutdown type.
Feature
BPDU Shutdown
User Port Shutdown
Policy rule - port disable
LPS
LPS
UDLD
NetSec
NI
LLDP Rouge Detection
Link Monitoring
Link Fault Propagation
Remote Fault Propagation
OmniSwitch AOS Release 8 Network Configuration Guide
command.
Reason Code
STP
QOS
QOS
LPS-D
LPS-S
UDLD
NetSec
NISup
LLDP
LinkMon
LFP
RFP
December 2017
Interfaces Violation Recovery
Shutdown Type
Discard
Discard
Discard
Discard
Admin-Down
Admin-Down
Admin-Down
Admin-Down
Discard
Admin-Down
Admin-Down
Admin-Down
page 1-16