Associating A Probe With A Cluster; Associating A Probe With A Server; Modifying Slb Probes - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Server Load Balancing

Associating a Probe with a Cluster

To associate an existing SLB probe with a cluster use the
slb cluster followed by the user-configured cluster name, probe, and the user-configured probe name.
For example, to associate a probe called "cluster_probe1" with a cluster called "WorldWideWeb", enter:
-> ip slb cluster WorldWideWeb probe cluster_probe1

Associating a Probe with a Server

To associate an existing SLB probe with a server use the
entering ip slb server ip followed by IP address of the server, cluster, the user-configured cluster name,
probe, and the user-configured probe name.
For example, to associate a probe called "server_probe1" with a server with an IP address of
10.255.11.127 that belongs to a cluster called "WorldWideWeb", enter:
-> ip slb server ip 10.255.11.127 cluster WorldWideWeb probe server_probe1

Modifying SLB Probes

The following subsections describe how to modify existing SLB probes.
Modifying the Probe Timeout
To modify this value, use the
user-configured probe name, the probe type, timeout, and the user-specified timeout value.
Note. See "Creating SLB Probes" on page 24-17
For example, to set the timeout for an HTTP SLB probe called "server_probe1" to 12000 seconds, enter:
-> ip slb probe server_probe1 http timeout 12000
Modifying the Probe Period
To modify this value, use the
user-configured probe name, the probe type, period, and the user-specified period value.
Note. See "Creating SLB Probes" on page 24-17
For example, to set the period for an HTTP SLB probe called "server_probe1" to 120 seconds, enter:
-> ip slb probe server_probe1 http period 120
OmniSwitch AOS Release 8 Network Configuration Guide
ip slb probe timeout command by entering ip slb probe followed by the
for a list of valid probe types.
ip slb probe period command by entering ip slb probe followed by the
for a list of valid probe types.
December 2017
ip slb cluster probe command by entering ip
ip slb server ip cluster probe
Configuring SLB Probes
command by
page 24-18