Reserved Ip Multicast Addresses; Ip Multicast Routing - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Omniswitch aos release 8
Table of Contents

Advertisement

Configuring IP Multicast Switching

Reserved IP Multicast Addresses

The Internet Assigned Numbers Authority (IANA) created the range for multicast addresses, which is
224.0.0.0 to 239.255.255.255. However, as the table below shows, certain addresses are reserved and
cannot be used.
Address or Address Range
224.0.0.0 through 224.0.0.255
224.0.1.0 through 224.0.1.255
224.0.2.0 through 224.0.255.0
224.1.0.0 through 224.1.255.255
224.2.0.0 through 224.2.255.255
224.252.0.0 through 224.255.255.255
225.0.0.0 through 231.255.255.255
232.0.0.0 through 232.255.255.255
233.0.0.0 through 233.255.255.255
234.0.0.0 through 238.255.255.255
239.0.0.0 through 239.255.255.255

IP Multicast Routing

IP multicast routing can be used for IP Multicast Switching and Routing (IPMSR). IP multicast routing is
a way of controlling multicast traffic across networks. The IP multicast router discovers which networks
want to receive multicast traffic by sending out Internet Group Management Protocol (IGMP) queries and
receiving IGMP reports from attached networks. The IGMP reports signal that users want to join a
multicast group.
If there is more than one IP multicast router in the network, the router with the lowest IP address is elected
as the querier router, which is responsible for querying the subnetwork for group members.
The IP multicast routing package provides the following two separate protocols:
Protocol Independent Multicast — Sparse Mode (PIM-SM) and Dense Mode (PIM-DM), which is
described in
"PIM" on page
Distance Vector Multicast Routing Protocol (DVMRP), which is described in
page
25-6.
The multicast routing protocols build and maintain a multicast routing database. The multicast routing
protocols forward multicast traffic to networks that have requested group membership to a specific
multicast group. IPMS uses decisions made by the routing protocols and forwards multicast traffic to ports
that request group membership. See the OmniSwitch AOS Release 8 Advanced Routing Configuration
Guide for more information on IP multicast routing protocols.
OmniSwitch AOS Release 8 Network Configuration Guide
Description
Routing protocols (e.g., OSPF, RIP2)
Internetwork Control Block (e.g., RSVP, DHCP,
commercial servers)
AD-HOC Block (e.g., commercial servers)
ST Multicast Groups
SDP/SAP Block
DIS Transient Groups
Reserved
Source Specific Multicast
GLOP Block
Reserved
Administratively Scoped
25-6.
December 2017
IPMS Overview
"DVMRP" on
page 25-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents