Displaying Static Link Aggregation Configuration And Statistics - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Static Link Aggregation
Displaying Static Link Aggregation Configuration
and Statistics
You can use Command Line Interface (CLI) show commands to display the current configuration and
statistics of link aggregation. These commands include the following:
linkagg range
show linkagg port
When you use the show linkagg command without specifying the link aggregation group number and
when you use the show linkagg port command without specifying the slot and port number these
commands provide a "global" view of switch-wide link aggregate group and link aggregate port
information, respectively.
For example, to display global statistics on all link aggregate groups (both static and dynamic), enter:
-> show linkagg
Number Aggregate SNMP Id
-------+--------+--------+-----+-----------+----------+-------+-----+
1 Static
2 Static
10 Dynamic
For example, to display global statistics on all ports associated with link aggregate groups (both static and
dynamic), enter:
-> show linkagg port
Slot/Port Aggregate
---------+----------+--------+--------+---+----+----+-----
2/1 Static
When you use the show linkagg agg command with the link aggregation group number and when you use
the show linkagg port command with the slot and port number these commands provide detailed views of
link aggregate group and link aggregate port information, respectively. These detailed views provide
excellent tools for diagnosing and troubleshooting problems.
For example, to display detailed statistics for port 1 in slot 2 that is attached to static link aggregate group
1, enter:
-> show linkagg port 4/1
Static Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Port position in the aggregate: 0,
Primary port
See the "Link Aggregation Commands" chapter in the OmniSwitch AOS Release 8 CLI Reference Guide
for complete documentation of show commands for link aggregation.
OmniSwitch AOS Release 8 Network Configuration Guide
Displays information on link aggregation groups.
Displays information on link aggregation ports.
Size Admin State Oper State Att/Sel Ports
40000001 4 ENABLED
40000002 8 ENABLED
40000010 8 ENABLED
SNMP Id Status
2001 ATTACHED
: 2001,
: 4/1,
: ENABLED,
: UP,
: ATTACHED,
: UP,
: 1,
: YES

Displaying Static Link Aggregation Configuration and Statistics

DOWN
DOWN
DOWN
Agg Oper Link Prim
1 UP UP YES
December 2017
0 0
0 0
0 0
page 8-11