Ipms Default Values - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring IP Multicast Switching
•
"Modifying IPMSv6 Parameters" on page
•
"IPMSv6 Application Example" on page
•
"Displaying IPMSv6 Configurations and Statistics" on page

IPMS Default Values

The table below lists default values for the OmniSwitch IPMS implementation.
Parameter Description
Administrative Status
Flood initial unknown multicast
traffic
IGMP Querier Forwarding
IGMP Version
IGMP Query Interval
IGMP Last Member Query Interval
IGMP Query Response Interval
IGMP Router Timeout
Source Timeout
IGMP Querying
IGMP Robustness
IGMP Spoofing
IGMP Zapping
Use an all-zero source IPv4 address
for IGMP query packets
OmniSwitch AOS Release 8 Network Configuration Guide
25-33.
25-44.
Command
ip multicast admin-state
ip multicast flood-unknown
ip multicast querier-
forwarding
ip multicast version
ip multicast query-interval
ip multicast last-member-
query-interval
ip multicast query-response-
interval
ip multicast router-timeout
ip multicast source-timeout
ip multicast querying
ip multicast robustness
ip multicast spoofing
ip multicast zapping
ip multicast zero-based-query
December 2017
IPMS Default Values
25-47.
Default Value/Comments
disabled
disabled
disabled
version 2
125 seconds
10 tenths-of-seconds
100 tenths-of-seconds
90 seconds
30 seconds
disabled
2
disabled
disabled
enabled
page 25-2