Configuring QoS
In This Chapter
This chapter describes QoS in general and how policies, port-based QoS configuration, and queue
management are used on the switch. It provides information about configuring QoS through the Command
Line Interface (CLI). CLI commands are used in the configuration examples; for more details about the
syntax of commands, see the OmniSwitch AOS Release 8 CLI Reference Guide.
The following topics and procedures are included in this chapter:
•
"QoS General Overview" on page
•
"Classification" on page
•
"Congestion Management" on page
•
"OmniSwitCongestion Avoidance" on page
•
"Traffic Policing and Shaping" on page
•
"QoS Defaults" on page
•
"Configuring QoS" on page
•
"Policy Applications" on page
OmniSwitch AOS Release 8 Network Configuration Guide
26-3.
26-5.
26-9.
26-19.
26-22.
26-33.
26-37.
26-74.
December 2017
In This Chapter
page 26-2