Configuring QoS
Policy Actions
The following actions are supported and can be combined with other actions.
Supported Policy Actions Table
•
ACL (disposition accept, drop, deny)
•
Priority/CoS
•
802.1p ToS/DCSP Stamping and Mapping (only
applies to the outer 802.1p value; cannot modify the
inner value)
•
Maximum Bandwidth
•
Maximum Depth
•
Tri-Color Marking (TCM) Rate Limiting
•
Shared (shares the bandwidth rate between rules that
specify the same maximum bandwidth action)
•
Port Redirection
•
Link Aggregate Redirection
•
No Cache (disables the logging of rule entries to the
•
hardware cache)
•
Port Disable
•
Permanent Gateway IPv4/IPv6
•
Mirror
The CLI prevents you from configuring invalid action combinations that are never allowed; however, it
does allow you to create combinations that are supported in some scenarios. For example, an action
specifying maximum bandwidth can be combined with an action specifying priority.
Use the following "Policy Action Combinations Table" together with the
Table"
as a guide when creating policy actions.
Policy Action Combinations Table
Drop
N/A
Drop
No
Priority
No
Stamp/Map
No
Max BW
No
Redirect
Port
No
Redirect
Linkagg
No
Port Disable
No
Permanent
Gateway IP
Yes
Mirroring
OmniSwitch AOS Release 8 Network Configuration Guide
Stamp/
Priority
Map
Max BW
No
No
No
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
"Supported Policy Actions
Redirect
Redirect
Port
Port
Linkagg
Disable
No
No
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
N/A
No
No
No
N/A
No
No
No
N/A
Yes
Yes
No
Yes
Yes
No
December 2017
QoS Policy Overview
Permanent
Gateway IP Mirror
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
N/A
Yes
Yes
N/A
page 26-31