Displaying Dynamic Link Aggregation Configuration And Statistics - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Dynamic Link Aggregation
Displaying Dynamic Link Aggregation
Configuration and Statistics
You can use Command Line Interface (CLI) show commands to display the current configuration and
statistics of link aggregation. These commands include the following:
linkagg range
show linkagg port
When you use the show linkagg command without specifying the link aggregation group number and
when you use the show linkagg port command without specifying the slot and port number, these
commands provide a "global" view of switch-wide link aggregate group and link aggregate port
information, respectively.
For example, to display global statistics on all link aggregate groups (both dynamic and static), enter:
-> show linkagg agg
A screen similar to the following would be displayed:
Number Aggregate
-------+----------+--------+----+-------------+-------------+-------------
1 Static
2 Dynamic
3 Dynamic
4 Static
When you use the show linkagg command with the agg keyword and the link aggregation group number
and when you use the show linkagg port command with the slot and port number, these commands
provide detailed views of the link aggregate group and port information, respectively. These detailed
views provide excellent tools for diagnosing and troubleshooting problems.
For example, to display detailed statistics for port 1 in slot 2 that is attached to dynamic link aggregate
group 1, enter:
-> show linkagg port 2/1
A screen similar to the following would be displayed:
Dynamic Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Primary port
LACP
Actor System Priority
Actor System Id
Actor Admin Key
Actor Oper Key
Partner Admin System Priority
Partner Oper System Priority
Partner Admin System Id
Partner Oper System Id
OmniSwitch AOS Release 8 Network Configuration Guide

Displaying Dynamic Link Aggregation Configuration and Statistics

Displays information on link aggregation groups.
Displays information on link aggregation ports.
SNMP Id Size Admin State
40000001 8 ENABLED
40000002 4 ENABLED
40000003 8 ENABLED
40000005 2 DISABLED
: 2001,
: 2/1,
: ENABLED,
: DOWN,
: CONFIGURED,
: DOWN,
: NONE,
: UNKNOWN,
: 10,
: [00:d0:95:6a:78:3a],
: 8,
: 8,
: 20,
: 20,
: [00:00:00:00:00:00],
: [00:00:00:00:00:00],
Oper State
UP
DOWN
DOWN
DOWN
December 2017
Att/Sel Ports
2 2
0 0
0 2
0 0
page 9-28