Sip Snooping Defaults - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring SIP Snooping

SIP Snooping Defaults

The following table shows SIP Snooping default values.
Parameter Description
The administrative status of SIP
Snooping
Configure the status of SIP snooping
SIP Snooping mode
Configure IP address of the trusted
servers
Configure SIP PDU DSCP marking
configuration.
Configure the SOS call strings
Configure the SOS-Call RTP/RTCP
DSCP Marking
Configure the UDP port of the
switch
Configure the TCP port of the switch
OmniSwitch AOS Release 8 Network Configuration Guide
Command
sip-snooping admin-state
sip-snooping port admin-state
sip-snooping mode
sip-snooping trusted server
sip-snooping sip-control
sip-snooping sos-call number
sip-snooping sos-call dscp
sip-snooping udp port
sip-snooping tcp port
December 2017
SIP Snooping Defaults
Default Value/Comments
disable
disable
automatic
none
By default, DSCP is not
marked on the switch.
none
EF/46
none
port 5260
page 14-2