Mvrp Defaults - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring MVRP

MVRP Defaults

The following table lists the defaults for MVRP configuration.
Parameter Description
Enables or disables MVRP globally
on a switch.
Enables or disables MVRP on
specific ports
Maximum number of VLANs
Registration mode of the port
Applicant mode of the port
Timer value for join timer.
Timer value for leave timer.
Timer value for leaveall timer.
Timer value for periodic timer.
Restrict dynamic VLAN registration
Restrict VLAN advertisement
Restrict static VLAN registration
OmniSwitch AOS Release 8 Network Configuration Guide
Command
mvrp
mvrp port
mvrp maximum-vlan
mvrp registration
mvrp applicant
mvrp timer join
mvrp timer leave
mvrp timer leaveall
mvrp timer periodic-timer
mvrp restrict-vlan-registration
mvrp restrict-vlan-
advertisement
mvrp static-vlan-restrict
December 2017
MVRP Defaults
Default Value/Comments
disabled
disabled
256
normal
active
600 milliseconds
1800 milliseconds
30000 milliseconds
1 second
not restricted
not restricted
By default, ports are assigned
to the static VLAN based on
MVRP PDU processing.
page 12-2