Displaying The Dual-Home Link Configuration - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Dual-Home Links

Displaying the Dual-Home Link Configuration

You can use Command Line Interface (CLI) show commands to display the current configuration and
statistics of link aggregation. These commands include the following:
show linkagg
show linkagg port
show dhl
show dhl num
show dhl num link
Note. See the "Link Aggregation Commands" chapter in the OmniSwitch AOS Release 8 CLI Reference
Guide for complete documentation of show commands for link aggregation.
OmniSwitch AOS Release 8 Network Configuration Guide
Displays information on link aggregation groups.
Displays information on link aggregation ports.
Displays the global status of the DHL configuration.
Displays information about a specific DHL session.
Displays information about a specific DHL link, for example linkA or
linkB and the VLAN details of the specified link.
December 2017
Displaying the Dual-Home Link Configuration
page 10-12