Quick Steps For Configuring Erp With Vlan Stacking - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring ERP
Quick Steps for Configuring ERP with VLAN
Stacking
The following steps provide a quick tutorial for configuring ERP with VLAN Stacking:
1
Create a VLAN Stacking SVLAN 1001 using the command.
-> ethernet-service svlan 1001
2
Create a VLAN Stacking service and associate the service with SVLAN 1001 using the
service service-name
-> ethernet-service service-name CustomerA svlan 1001
3
Configure ports 1/1 and 1/2 as VLAN Stacking Network Network Interface (NNI) ports, associate the
ports with SVLAN 1001, and configure them for use with ERP using the
command.
-> ethernet-service nni port 1/1
-> ethernet-service nni port 1/2
-> ethernet-service svlan 1001 nni port 1/1
-> ethernet-service svlan 1001 nni port 1/2
4
Create ERP ring ID 1 and associate the two NNI ports to the ring using the
-> erp-ring 1 port1 1/1 port2 1/2 service-vlan 1001 level 5
5
Configure the RPL on one node using the
-> erp-ring 1 rpl-node port 1/1
6
Create additional SVLANs and add to the ring ports using the command.
-> ethernet-service svlan 1002
-> ethernet-service svlan 1003
-> ethernet-service svlan 1002 nni port 1/1-2
-> ethernet-service svlan 1002 nni port 1/2-2
7
Enable the ERP ring configuration using the
-> erp-ring 1 enable
8
Display the ERP configuration using the
-> show erp
OmniSwitch AOS Release 8 Network Configuration Guide
command.
erp-ring rpl-node
show erp

Quick Steps for Configuring ERP with VLAN Stacking

command.
erp-ring enable command.
command.
December 2017
ethernet-
ethernet-service svlan nni
erp-ring command.
page 11-11