The Firmware Upgrade Screen - ZyXEL Communications WAH7608 User Manual

Figure 70 System > About
The following table describes the labels in this screen.
Table 35 System > About
LABEL
Device Name
FW Version
IMEI
Serial Number
Reboot Device

14.3 The Firmware Upgrade Screen

This screen allows you to upload new firmware to your WAH7608. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device's
performance.
Only use firmware for your device's specific model.
To access this screen, click System > Setting > Firmware Upgrade. This screen displays the current
firmware version and status of the WAH7608. Click Choose File to find the location of the file. Remember
that you must decompress compressed (.ZIP) files before you can upload them. Click Update to begin
the upload process.
The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot.
Do NOT turn off the WAH7608 while firmware upload is in progress!
Chapter 14 System
DESCRIPTION
This displays the model name of this Zyxel device.
This displays the current firmware version of the WAH7608.
This displays the International Mobile Equipment Number (IMEI) which is the serial number of the
built-in 3G module. IMEI is a unique 15-digit number used to identify a mobile device.
This displays the serial number of the WAH7608.
Click Reboot to restart the device. Wait a few minutes until the login screen appears. If the login
screen does not appear, type the IP address of the device in your Web browser.
WAH7608 User's Guide
113