settings manually. Depending on the devices in your network, you can either press a button (on the
device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices.
Then, they connect and set up a secure network by themselves. See how to set up a secure wireless
network using WPS in the
8.2 The General Screen
Use this screen to enable the wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the LTE2566-M634 from a device connected to the wireless LAN
and you change the LTE2566-M634's SSID, channel or security settings, you will lose your
wireless connection when you press Apply to confirm. You must then change the
wireless settings of your device to match the LTE2566-M634's new settings.
To access this screen, click Configuration > Network > Wireless LAN > General.
Chapter 8 WLAN
Section 4.2 on page
32.
LTE2566-M634 User's Guide
60