Configuring Simple Network Time Protocol (Sntp); Show Sntp - Enterasys SecureStack B3 Configuration Manual

Example
This example enables multicast flood protection.
B3(su)->set mac unreserved-flood enable

Configuring Simple Network Time Protocol (SNTP)

Purpose
To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a
network.
Commands
For information about...

show sntp

set sntp client
clear sntp client
set sntp server
clear sntp server
set sntp poll-interval
clear sntp poll-interval
set sntp poll-retry
clear sntp poll-retry
set sntp poll-timeout
clear sntp poll-timeout
show sntp
Use this command to display SNTP client settings.
Syntax
show sntp
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Configuring Simple Network Time Protocol (SNTP)
Refer to page...
SecureStack B3 Configuration Guide 13-25
13-25
13-27
13-27
13-28
13-28
13-29
13-29
13-30
13-30
13-31
13-31