Enterasys SecureStack B3 Configuration Manual page 520

show dot1x auth-config
Parameters
authcontrolled‐
portcontrol
maxreq
quietperiod
reauthenabled
reauthperiod
servertimeout
supptimeout
txperiod
port‐string
Defaults
If no parameters are specified, all 802.1X settings will be displayed.
If port‐string is not specified, information for all ports will be displayed.
Mode
Switch command, read‐only.
Examples
This example shows how to display the EAPOL port control mode for
B3(su)->show dot1x auth-config authcontrolled-portcontrol ge.1.1
Port 1: Auth controlled port control:
This example shows how to display the 802.1X quiet period settings for
B3(su)->show dot1x auth-config quietperiod ge.1.1
Port 1: Quiet period:
This example shows how to display all 802.1X authentication configuration settings for
B3(ro)->show dot1x auth-config ge.1.1
Port : 1
PAE state:
Backend auth state:
Admin controlled directions:
Oper controlled directions:
Auth controlled port status:
Auth controlled port control:
Quiet period:
Transmission period:
Supplicant timeout:
20-12 Security Configuration
(Optional) Displays the current value of the controlled Port control
parameter for the port.
(Optional) Displays the value set for maximum requests currently in use by
the backend authentication state machine.
(Optional) Displays the value set for quiet period currently in use by the
authenticator PAE state machine.
(Optional) Displays the state of reauthentication control used by the
Reauthentication Timer state machine.
(Optional) Displays the value, in seconds, set for the reauthentication
period used by the reauthentication timer state machine.
(Optional) Displays the server timeout value, in seconds, currently in use
by the backend authentication state machine.
(Optional) Displays the authentication supplicant timeout value, in
seconds, currently in use by the backend authentication state machine.
(Optional) Displays the transmission period value, in seconds, currently in
use by the authenticator PAE state machine.
(Optional) Limits the display of desired information information to specific
port(s). For a detailed description of possible port‐string values, refer to
"Port String Syntax Used in the CLI" on page 5‐1.
30
Auth-Config
60
30
30
ge
Auto
ge
Initialize
Initialize
Both
Both
Authorized
Auto
.1.1:
.1.1:
.1.1:
ge