Table of Contents
Advertisement
Syntax
show lldp port local-info [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, local system information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display the local system information stored for port ge.4.1. Table
describes the output fields of this command.
B3(rw)->show lldp port local-info ge.4.1
Local Port
: ge.4.1
--------------------
Port Desc
: ... 1000BASE-TX RJ45 Gigabit Ethernet Frontpanel Port
Mgmt Addr
: 10.21.64.100
Chassis ID
: 00-E0-63-93-74-A5
Sys Name
: LLDP PoE test Chassis
Sys Desc
: Enterasys Networks, Inc.
Sys Cap Supported/Enabled
Auto-Neg Supported/Enabled
Auto-Neg Advertised
Operational Speed/Duplex/Type : 100 full tx
Max Frame Size (bytes)
Vlan Id
LAG Supported/Enabled/Id
Protocol Id : Spanning Tree v-3 (IEEE802.1s)
LACP v-1
GVRP
PoE Device
PoE Power Source
PoE MDI Supported/Enabled
PoE Pair Controllable/Used
PoE Power Class
PoE Power Limit (mW)
PoE Power Priority
Table
4‐4 describes the information displayed by the show lldp port local‐info command.
(Optional) Displays local system information for one or a range of
ports.
Local Port Id: ge.4.1
: bridge,router/bridge
: yes/yes
: 10BASE-T, 10BASE-TFD,
100BASE-TX, 100BASE-TXFD,
1000BASE-TFD,
Bpause
: 1522
: 1
: no/no/0
: PSE device
: primary
: yes/yes
: false/spare
: 2
: 15400
: high
show lldp port local-info
SecureStack B3 Configuration Guide 4-19
4‐4
Advertisement
Table of Contents
