Set Snmp Notifyprofile; Clear Snmp Notifyprofile - Enterasys SecureStack B3 Configuration Manual

Example
This example shows how to display SNMP notify information for the profile named "area51":
B3(su)->show snmp notifyprofile area51
--- SNMP notifyProfile information ---
Notify Profile
TargetParam
Storage type
Row status

set snmp notifyprofile

Use this command to create an SNMP notify filter profile configuration. This associates a
notification filter, created with the set snmp notifyfilter command ("set snmp notifyfilter" on
page 6‐33), to a set of SNMP target parameters to determine which management targets should
not receive SNMP notifications.
Syntax
set snmp notifyprofile profile targetparam targetparam [volatile | nonvolatile]
Parameters
profile
targetparam
targetparam
volatile |
nonvolatile
Defaults
If storage type is not specified, nonvolatile (permanent) will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to create an SNMP notify profile named area51
parameters entry.
B3(su)->set snmp notifyprofile area51 targetparam v3ExampleParams

clear snmp notifyprofile

Use this command to delete an SNMP notify profile configuration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
= area51
= v3ExampleParams
= nonVolatile
= active
Specifies an SNMP filter notify name.
Specifies an associated entry in the SNMP Target Params Table.
(Optional) Specifies a storage type.
set snmp notifyprofile
and associate a target
SecureStack B3 Configuration Guide 6-35