Enterasys SecureStack B3 Configuration Manual page 185

Parameters
port port‐string
status detail |
summary
counters
Defaults
None.
Mode
Switch command, read‐only.
Usage
State definitions, such as ActorAdminState and Partner AdminState, are indicated with letter
abbreviations. If the show port lacp command displays one or more of the following letters, it
means the state is true for the associated actor or partner ports:
• E = Expired
• F = Defaulted
• D = Distributing (tx enabled)
• C = Collecting (rx enabled)
• S = Synchronized (actor and partner agree)
• G = Aggregation allowed
• S/l = Short/Long LACP timeout
• A/p = Active/Passive LACP
For more information about these states, refer to set port lacp (page
specification.
Examples
This example shows how to display detailed LACP status information
B3(su)-> show port lacp port ge.1.12 status detail
Port Instance:
ActorPort:
ActorSystemPriority:
ActorPortPriority:
ActorAdminKey:
ActorOperKey:
ActorAdminState:
ActorOperState:
ActorSystemID:
SelectedAggID:
AttachedAggID:
MuxState:
DebugRxState:
Displays LACP information for specific port(s). For a detailed description
of possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 5‐1.
Displays LACP status in detailed or summary information.
Displays LACP counter information.
ge.1.12
1411 PartnerAdminPort:
32768 PartnerOperPort:
32768 PartnerAdminSystemPriority:
32768 PartnerOperSystemPriority:
32768 PartnerAdminPortPriority:
-----GlA PartnerOperPortPriority:
-F----lA PartnerAdminKey:
00-e0-63-9d-b5-87 PartnerOperKey:
none PartnerAdminState:
none PartnerOperState:
Detached PartnerAdminSystemID:
port Disabled PartnerOperSystemID:
show port lacp
5‐44) and the IEEE 802.3 2002
f
or port .1.12:
ge
--DCSGlp
--DC-Glp
00-00-00-00-00-00
00-00-00-00-00-00
SecureStack B3 Configuration Guide 5-43
1411
1411
32768
32768
32768
32768
1411
1411