Stp Group Confugration - Enterasys VH-2402-L3 Management Manual

STP Group Confugration

To define which ports will be members of an STP Group, highlight
Group Create/Delete and press enter.
Toggle the Action:<Add/Modify> field to Add/Modify.
Choose a name for the group and enter it in the Group
Name:[
76 VH-2402-L3 Management Guide
voting process between switches on the
network to determine which switch will be
the root switch. A low number indicates
a high priority, and a high probability that
this switch will be elected as the root
switch.
The Hello Time cannot be longer than the Max.
Age. Otherwise, a configuration error will occur.
Observe the following formulas when setting the
above parameters:
Max. Age ≤ 2 x (Forward Delay - 1 second)
Max. Age ≥ 2 x (Hello Time + 1 second)
Figure 1-59. STP Group Configuration
] field. The group name does not necessarily
9033691-01