Valid Values For Policy Classification Rules - Enterasys SecureStack B3 Configuration Manual

Stackable switches
Table of Contents

Advertisement

ipdestsocket
ipsourcesocket
iptos
macdest
macsource 
tcpdestport
tcpsourceport 
udpdestport 
udpsourceport 
data
mask mask
vlan vlan 
cos cos
drop | forward
Defaults
None.
Mode
Switch command, read‐write.
Usage
Table
10‐3 provides the set policy rule data values that can be entered for a particular classification 
type, and the mask bits that can be entered for each classifier associated with that parameter.
Table 10-3 Valid Values for Policy Classification Rules
Classification Rule Parameter
ether
ipproto
Destination or Source IP Address:
ipdestsocket
ipsourcesocket
iptos
Classifies based on destination IP address with optional post‐fixed port.
Classifies based on source IP address, with optional post‐fixed port. 
Classifies based on Type of Service field in IP packet.
Classifies based on MAC destination address.
Classifies based on MAC source address.
Classifies based on TCP destination port.
Classifies based on TCP source port.
Classifies based on UDP destination port.
Classifies based on UDP source port.
Specifies the code for a predefined classifier. This value is dependent on 
the classification type entered. Refer to Table
each classification type.
(Optional) Specifies the number of significant bits to match, dependent on 
the data value entered. Refer to Table
classification type and data value.
Classifies to a VLAN ID.
Specifies that this rule will classify to a Class‐of‐Service ID. Valid values 
are 0 ‐ 4095. A value of ‐1 indicates that no CoS forwarding behavior 
modification is desired. (Not supported on B3, C3, and G3.)
Specifies that packets within this classification will be dropped or 
forwarded.
data value
Type field in Ethernet II packet:
1536 - 65535 or 0x600 - 0xFFFF
Protocol field in IP packet:
0 - 255 or 0 - 0xFF
IP Address in dotted decimal
format: 000.000.000.000 and
(Optional) post-fixed port: 0 -
65535
Type of Service field in IP packet:
0 - 255 or 0 - 0xFF
10‐3 for valid values for 
10‐3 for valid values for each 
mask bits
1- 16
1- 8
1 - 48
1- 8
SecureStack B3 Configuration Guide 10-11
set policy rule

Advertisement

Table of Contents
loading

Table of Contents