Clear Tftp Retry; Clearing And Closing The Cli; Purpose; Commands - Enterasys SecureStack B3 Configuration Manual

clear tftp retry

Use this command to reset the TFTP retry value to the default value of 5 retries.
Syntax
clear tftp retry
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the retry value to the default of 5 retries.
B3(rw)-> clear tftp retry

Clearing and Closing the CLI

Purpose

To clear the CLI screen or to close your CLI session.

Commands

The commands used to clear and close the CLI session are listed below.
For information about...
cls
exit

cls (clear screen)

Use this command to clear the screen for the current CLI session.
Syntax
cls
Parameters
.
None
Refer to page...
3-49
3-50
SecureStack B3 Configuration Guide 3-49
clear tftp retry