Priority Classification Configuration Screen - Enterasys 2H25x User Manual

Priority Classification Configuration Screen

6.7

PRIORITY CLASSIFICATION CONFIGURATION SCREEN

NOTE: The Priority Classification Configuration screen does not display when the
operational mode of the device is set to SECURE FAST VLAN.
Section 4.2.9
When to Use
To perform the following functions:
•
Display the current Priority, Classification, and Description entries of each classification rule.
•
Assign priorities according to Classification Rules.
•
Add/delete a priority and associated protocol entry.
•
Access the Protocol Port Configuration screen.
•
Assign an 8-bit TOS (also known as DF) value to incoming IP frames. For more information on
the IP TOS Function, refer to
•
Write over an existing TOS value.
When a frame is received that already contains an 802.1Q frame tag, frame classification is not
implemented. Instead, the frame is processed by the SmartSwitch device according to the
information contained in the 802.1Q frame tag.
How to Access
Use the arrow keys to highlight the PRIORITY CLASSIFICATION CONFIGURATION menu
item on the 802.1 Priority Configuration Menu screen and press ENTER. The Priority
Classification Configuration screen,
6-22 802.1 Configuration Menu Screens
provides instructions for setting the operational mode.
Section 6.7.2.
Figure 6-7, displays.