Table of Contents
Advertisement
deadtime — Length of time in minutes, for which a RADIUS server is skipped over by transaction
requests. (Range: 0 - 2000)
Default Configuration
The default dead time is 0 minutes.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a dead time where a RADIUS server is skipped over by transaction requests
for this period, to 10 minutes.
Console (config)# radius-server deadtime 10
5.18.7 show radius-servers
The show radius-servers user EXEC command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the RADIUS server settings.
Console# show radius-servers
Port
IP address
Auth
Acct
TimeOut
Retransmit
Deadtime Source IP
Priority
Usage
Advertisement
Table of Contents
