Static Unicast Address Configuration Menu - Planet WSW-2620 Manual

Console Management

Static Unicast Address Configuration Menu

Figure 5.17 Static Unicast Address Configuration Menu
Note: The MAC addresses must be specified in canonical (LSB)
format.
Up to 16 static MAC addresses can be assigned in this menu. Once a
MAC address is assigned to a port and the status is Active, the
device associated with the MAC address can then only be connected
to the assigned port. If the device is connected to a port other than
the assigned port, a violation occurs and the packets are not sent.
When a MAC address is assigned to a port and its Admin Status is
set to Yes, copies of all frames sent to that MAC address will be
sent to the monitor port. When Monitored is set to "No", no copies
of the packets are sent to the Monitor port.
Note: In order to capture the copies of the frames, you must
have a network analyzer connected to the monitor port.
5-21